Painter's Pole Staging
The fastest, most economical method for painting two-story Cape and Colonial style houses. Available in 18' and 24' lengths, the APPROVED PAINTER'S POLE platform can be easily adjusted in height. It is a quick and simple method designed to replace Ladder Jacks, Trestles and Swing Stages on residential houses.
The aluminum 4" X 4" poles (spaced up to 22 feet apart) are placed upright about 30" from the building. Two small screw eyes are put into the building opposite each pole and spaced about 30" apart. Two hooks running from the pole to the screw eyes hold the pole in an upright position. There is a small pulley toadjust the height of the hoooks to the screw eyes. A steel bracket, which any type of 14" plank sits on, is pulled up by a pulley attached to the top of the pole.
Approved by Massachusetts Department of Labor & Industries
Now the best of two systems have been combined! Our approved painter's poles and the 24' Alum-A-Pole make a painter's pole system that will last longer than ever before.
Note: Determine which product you need from the table below and then select the corresponding model number from the drop-down menu above. That individual product's price will be presented in red above.
|PTP18AL||18' Aluminum Painter's Pole||73 lbs.|
|PTP24AL||24' Aluminum Painter's Pole||86 lbs.|
|SCEY||Screw Eyes||3 lbs.|
|PAINTER'S POLE STAGING REPLACEMENT PARTS|
|PTP-GR||Guard Rail Post||7 lbs.|
|PTP-WU||Complete Whisker Unit||4.5 lbs.|
|PTP-WR||Whisker Rods w/Nuts||2 lbs.|
|PTP-PR||Whisker Rope||1 lb.|
|PTP-SP||Bottom Unit Spring Only||-|
|PTP-TB||Top Bracket Assembly||1 lb.|
|PTP-TP||#4 Top Pulley Only||1 lb.|
|PTP-R18||18' Bottom Unit Rope||3 lbs.|
|PTP-R24||24' Bottom Unit Rope||3 lbs.|