Lynn Ladder & Scaffolding Co., Inc.

Oak Rolling Ladder w/Top Rolling hdwe & Bottom Wheels - Brass Hardware

This rolling ladder is made of best-grade red oak, which is filled and varnished. Steps are screwed to rails, not nailed, and rods are placed under each step for greater strength.

The top slide feature is available in either roll type or hook slide. The roll type top fixture is for a ladder permanently attached to the track. The hook slide top fixture is used when a ladder needs to be removed from one section of track to another.

The ladder rolls easily on bottom fixtures. Also available is an old style malleable bottom fixture for a more antique look.

Measurements of the Rolling Ladder are as follows:

• Height: as required (7" clearance above the track is required)
• Steps: 4¹⁄₄" deep
• Outside width: 16"

All Measurements can be altered.

All track includes end and center brackets designed to mount on 3-foot upright centers.

How to Order - Please Indicate the Following:

1. Height of track: measure from floor vertically to center of track. You need 7" clearance above track.
2. Specify length of track desired.
3. If you want rubber treads.
4. If you want wheel brakes.

If the shelving layout is unusual, please provide us with a rough sketch.

Oak Rolling Ladders and Parts Cross-Reference Below: