Lynn Ladder & Scaffolding Co., Inc.

16 FT Wall Lift

• The adjustable wall stop must be pre-set for the proper wall height. Various settings are listed on the decal (settings approximately 1.45 times the wall height).
• Cable is 5/32" galvanized aircraft cable.
• Winch is standard two-way ratchet winch. Operates similar to a bumper jack. It may be jacked down, one notch at a time until the load is removed, after which the cable may be pulled out freely.
• Lifting is accomplished by the wratchet winch. Loads may be raised or lowered by setting the up-down lever.
• Double headed nails secure the hinged floor plate to the subfloor. If on concrete, a plank may be extended to a solid object and used as a substitute. The plank must be secured to prevent it from slipping or lifting during the wall lift.
• Telescopes to the closed position for storage and hauling.

Weighs 53 lbs.

Specifications:

• Extended length: 16'
• Closed length: 9'6"
• Weight (per jack): 53 lbs.
• Wall lift: 7' to 10'6"
• Capacity (per jack): 1000 lbs.